Shop
DIR4WP25 – Process Indicator
The DIR4WP57 Powered Process Indicator is a 85 to 250 VAC or 12-40 VDC powered microprocessor based indicator that incorporates a four (4) digit 57mm digit height LED display in a weatherproof surface mount enclosure with four set points that can switch 240VAC at one ampere resistive. The instrument is touch witch programmable from the front panel for input range, relay operation and display intensity.
CALIBRATION NOTE
- Accepts all standard process signals
- Digital instrument with touch switch programming of all functions – input range, relay on and off point, high or low alarm, and decimal point position
- Non-volatile storage of variables
- Differential input
- Low cost – High performance
- 85 to 250VAC 47-63 Hz supply or factory fitted 12 to 40vdc supply
- 4 digit high brightness LED display of 25mm digit height
- Decimal point programming
- Four (4) set point relays with form C contacts
- IP65 surface mount enclosure of 160mm long x 95mmwide x 70mm deep
- 24VDC loop supply for loop powered sensors and transmitters.
The DIR4WP25 Powered Process Indicator is an advanced instrument which has been designed and manufactured to stringent specifications which accept all the standard analogue process signals.
The DIR4WP25 provides four (4) set point relays with 99% dead band. All the set point relays have changeover contacts and will switch one amp at 240VAC resistive. Screw terminal electrical connection by two part plug connectors allows simple connection and disconnection.
