Shop

DI45 Process Indicator

The DI45 Powered Process Indicator is a 120/240VAC or 10-40VDC powered 4.5 digit (19999 counts) process indicator supplied in a panel mount enclosure with a 14.2mm high LED display which is rangeable in engineering units for millivolt, milliamp and voltage inputs. Range cards are available for PT100 resistance bulbs. An optional 24VDC at 30mA loop supply is available for the direct connection of 2 wire transmitters.

CALIBRATION NOTE
Make an enquiry

  • Accepts all standard process signals
  • User rangeable in engineering units
  • Band gap reference
  • Differential input
  • 120 or 240VAC 47-63 Hz supply
  • 4.5 digit high brightness LED display with a character height of 14.5mm
  • Low cost – High performance
  • Decimal point selection
  • Optional Parallel BCD output
  • The DI45 is supplied in 48x96mm DIN enclosure
  • Isolated power supply of 24VDC for loop powered sensors and transmitters
  • Applications include the display of flow, level and pressure

The DI45 Powered Process Indicator is an advanced instrument that have been designed and manufactured to stringent specifications.

The instruments have been designed to accept all the standard analogue process signals. The input measurement is shown on a high contrast LED display.

The DI45 incorporates an LSI CMOS 20,000 count dual slope integrating analogue to digital converter which is designed to reject electrical interference that normally abounds in industrial environments. The front panel of the DI45 series are sealed to IP65 and includes screw terminal electrical connection.

specifications

INPUT DETAILS
  • The instrument has a bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the ratio metric measurement system. Full scale ranges of 20mV to 200VDC 200uA to 2Amps and 4-20mA are acceptable.
  • CMRR greater than 86db.
  • NMRR greater than 100db.
DISPLAYS
  • A 4.5 digit high contrast light emitting diode (LED) with a wide viewing angle.
  • The DI45 has a digit height of 14.2mm.
DECIMAL POINTS

Four (4) position user selectable by push on jumper for formats 1000.0; 100.00; 10.000; 1.0000

ENVIRONMENTAL PARAMETERS
  • 0-70 degrees Celsius
  • 0-90% rh NON condensing
INSTRUMENT POWER SUPPLY

120/240VAC 47-63 Hz or factory fitted DC to DC converter isolator from 5 to 48VDC.

TRANSDUCER POWER SUPPLY

A 24VDC at 30mA transducer power supply is incorporated in the instrument.

WEIGHT

DI45H is 300 grams.

MOUNTING DETAILS

DI45: Panel mounting plastic enclosure of case dimensions 96mm wide by 48mm high by 110mm deep with a panel cut out of 93mm wide by 45mm high.

ORDERING INFORMATION
  • The part number is configured as
  • Model/input signal/display units/power supply
  • Sample number: DI45/4-20mA/0-100.00/240VAC
  • All units shipped factory calibrated to 0-100.00
Category: