The BGI100 Powered Bar Graph Indicator is a 85 to265VAC or 10-40VDC powered 101 element bar graph and a 4 digit numeric LED display of 10mm character height in the one package. It has a 100mm high linear bar of light and a 4 digit numeric display which accepts inputs of volts and milliamps. An optional 24VDC loop supply is available for the direct connection of 2 wire transmitters.
The BGI100 Powered Process Indicator is an advanced instrument which has been designed to accept all the standard process signals. This instrument incorporates a CMOS dual slope integrating analogue to digital converter which is deigned to reject electrical interference that normally abounds in industrial environments. The front panel of the BGI100 is sealed to IP56 and the instrument includes screw terminal electrical connections.
A 101 element high contrast light emitting diode (LED) bar of light of 128mm high with a wide viewing angle and a viewing distance of 5 metres and a 4 digit numeric display of 10mm digit height.
24VDC power supply at 30mA for powering 2 wire transmitters.
|Terminal 1: Input common (-) for mA & Volts||Terminal 8: not used|
|Terminal 2: Input mA (+)||Terminal 9: not used|
|Terminal 3: Input Volts (+)||Terminal 10: not used|
|Terminal 4: 24VDC Loop supply||Terminal 11: not used|
|Terminal 5: not used||Terminal 12: 85 to265VAC or 24VDC active supply|
|Terminal 6: not used||Terminal 13: VAC neutral or 0Vdc supply|
|Terminal 7: not used||Terminal 14: Ground supply|
85 to265VAC 47-63 Hz or factory fitted DC converter isolator from 12 to 40VDC.
An optional 24VDC at 30mA loop power supply is incorporated in the instrument.
Panel mounting with a panel cut out of 43mm wide by 138mm high.